We use cookies to offer you a more personalized and smoother experience. By visiting this website, you agree to our use of cookies. If you prefer not to accept cookies or require more information, please visit our Privacy Policy.
Αν γνωρίζετε πραγματικά σε ποια κατηγορία εντάσσεται η ερώτησή σας, μπορείτε να επιλέξετε μία από τις παρακάτω κατηγορίες για συχνές ερωτήσεις. Κατάλογος:
Αποτελέσματα:
Question (524):
I cannot control the RGB lighting of the graphics card. What can I do to fix it?(2023/3/1)
Answer:Please flash the RGB controller firmware of the graphics card via the following procedure.
Step 1. Find and download the correct firmware for your graphics card.
Below steps use the RX 7900 XTX Phantom Gaming 24GB OC (RX7900XTX PG 24GO) as example. File and folder names can be different when using another card.
*Please make sure that the graphics card driver is installed before flashing the RGB firmware. *Exit the RGB software before flashing the RGB firmware (and make sure it is not running in the background).
Step 2. Please extract the RGB firmware tool and copy the path of the folder that contains the RGB firmware.
Step 3. Open Command Prompt as administrator.
Step 4. Type cd and paste the path that you have just copied.
Step 5. Hit the Enter key.
Step 6. Type the word "Update” and press the Tab key on the keyboard. A full command file name will show up.
*The command will be vary based on the graphics card used.
Step 7. Use the Enter key to start flashing the RGB firmware. Give it some time.
Step 8. Once the RGB firmware is updated, the command prompt will show "Update Pass.”
Step 9. Start the ASRock RGB software and check if the graphics card's RGB lighting can be controlled.
Question (515):
Which graphics cards are supported on my Deskmeet?(2022/7/18)
Answer:We recommend using a graphic card that consumes up to 200 watt, and supports a discrete Dual slot Graphics card up to 20CM.
The Deskmeet supports CPUs that are up to 65W ("Default TDP” or "Processor Base Power”). The peak power draw of a 65W CPU is about 200W.
The Deskmeet comes with a 500W PSU. So it is able to handle a graphic card with a power draw up to 200W.
For the graphics card's power consumption, please check the specifications provided by the graphic card's vendor.
When checking the power consumption of the graphics card, please refer to the examples below. The power consumption is marked red here:
AMD
NVidia
Intel
Question (493):
How do I enable IGPU Multi-Monitor on B550/A520 series motherboard?(2020/10/1)
Answer:To enable IGPU Multi Monitor, please refer to the following path and set the [iGPU Configuration] to [UMA_AUTO].
Advanced\AMD CBS\NBIO Common Options\GFX Configuration
Question (476):
How do I enable the AMD ReLive function?(2019/3/1)
Answer:Please refer to the following steps to enable the AMD ReLive function.
Step 1 – Go to ASRock website to download the AMD driver.
Link: https://www.asrock.com/Graphics-Card/index.asp
Step 2 – Select "Install Radeon ReLive” after the driver installation.
Step 3 – Go to the ReLive page and switch ReLive to ON to enable the function.
Step 4 – The ReLive function is enabled.
Question (475):
I can't install the graphics card driver. How can I solve it?(2019/3/1)
Answer:1. Please download the latest display driver from the official website.
Link: https://www.asrock.com/Graphics-Card/index.asp
2. Make sure your graphics driver version is compatible with the current Operation System.
3. Right click on "Computer” and select "Manage”.
4. Click "Device Manager” and double click "Display adapters”.
5. Right click on the graphics card and click "Update driver”.
6. Click "Browse my computer for driver software”.
7. Browse for the latest driver downloaded in Step 1.
8. Once the driver is installed successfully, you will see the model name of the card.
Question (477):
Can I use a DVI to D-sub adaptor for the ASRock RX500 series?(2019/3/1)
Answer:The RX500 series do not support D-sub outputs, so DVI to D-sub adaptors are not supported.
As for a HDMI/DP to D-sub convertor, the third-party adapter chip will be required, which may occur some problems such as no signal, no system display, etc.
We strongly recommend users using a direct DP, HDMI or DVI connection to the card.
Question (478):
If there is a new driver available on ASRock website for my graphics card, should I update the driver?(2019/3/1)
Answer:A new driver may be needed for the following reasons:
1. To support new products or new features
2. To optimize graphics performance or game performance
3. To fix known issues or refine existing features
If your system is working properly, we do not recommend updating the driver.
If you need to update the new driver, you must first uninstall the original driver, restart the computer, and then install the new driver.
Question (479):
I have installed a graphics card on my system, but monitor doesn't display the signals. What should I do?(2019/3/1)
Answer:Please refer to the following suggestions to check your system.
1. Unplug the graphics card and see if the system can display from onboard graphics. If not, the problem may be caused by other peripherals instead of the graphics card.
2. Check the cable connections between the graphics card and your monitor.
3. Make sure the PCIe power cable is well connected to the graphics card.
4. Ensure the input signal setting of the monitor is properly configured for the graphics output (DVI, HDMI, DP…).
5. If your motherboard supports more than one PCIe slot, please install the graphics card to other PCIe slot and try again.
Question (474):
I have intermittent black screen or display loss problems. What should I do?(2019/3/1)
Question (393):
Η οθόνη μου και το DisplayPort καλώδιό μου υποστηρίζουν DP1.2. Παρόλ' αυτά, ο AMD VGA driver εξακολουθεί να δείχνει "Μια οθόνη συμβατή με τις ταχύτητες και το multi-streaming του DisplayPort v1.2 είναι αυτή τη στιγμή συνδεδεμένη με ένα καλώδιο που δεν υποστηρίζει το πρότυπο DisplayPort v1.2" στην πλατφόρμα AMD FM2+. Πως διορθώνω αυτό το πρόβλημα;(2015/6/1)
Question (361):
Πως ενεργοποιώ το AMD Dual Graphics Feature σε μια AMD Πλατφόρμα?(2014/3/1)
Answer:Βήμα 1:
Σιγουρευτείτε πως είναι περασμένο το τελευταίο BIOS, και κρατήστε το default UEFI Setting για στην "Dual Graphics" επιλογή στο [Auto]
BIOS download link: https://www.asrock.com/support/download.asp
Βήμα 2:
Τοποθετήστε μια AMD Radeon PCI Express κάρτα γραφικών στο PCIE Slot.
Βήμα 3:
Συνδέστε το καλώδιο της οθόνης στην onboard VGA θύρα. Παρακαλώ σημειώστε πως ο τωρινός VGA Driver/VBIOS επιτρέπει Dual Graphics output μόνο από τις ενσωματωμένες εξόδους για οθόνη.
Για μελλοντικές αναβαθμίσεις, παρακαλώ πηγαίνετε στο website μας για περαιτέρω πληροφορίες.
Βήμα 4:
Μπουτάρετε στο λειτουργικό σύστημα.
Ύστερα αφαιρέστε τον AMD Driver εάν έχετε ήδη εγκατεστημένο στο σύστημά σας.
Βήμα 5:
Εγκαταστήστε τον onboard VGA driver από το support CD στο σύστημά σας, τόσο για την ενσωματωμένη VGA όσο και
για την ξεχωριστή.
Βήμα 6:
Κάντε επανεκκίνηση τον υπλογιστή σας. Δεξί κλίκ στην επιφάνεια εργασίας και Click στο AMD VISION Engine Control Center για να μπέιτε στο κέντρο ελέγχου.
Βήμα 7:
Μπορείτε επίσης να κλικάρετε στο Windows Taskbar στο εικονίδιο του AMD VISION Engine Control Center για να μπείτε στο κέντρο ελέγχου.
Βήμα 8:
Στο AMD VISION Engine Control Center, διαλέξτε το "Performance". Κλικάρετε στο "AMD CrossFire™".
Βήμα 9:
Κλικάρετε στο "Enable CrossFireTM" και μετά στο "Apply" για να σωθούν οι επιλογές σας.
Βήμα 10:
Κάντε επανεκίνηση το σύστημά σας. Τα Dual Graphics είναι έτοιμα.
Question (352):
Δεν μπορώ να εγκαταστήσω τον driver για την VGA για τον ενσωματωμένο επεξεργαστή E3-1265L v3 στο βοηθητικό CD. Ποιον VGA driver πρέπει να εγκαταστήσω για τον E3-1265L v3 CPU;(2013/9/1)
Question (342):
Θέλησα να κάνω update στο Virtu MVP και παρατήρησα ότι υπάρχουν δύο διαφορετικές Lucid Virtu MVP επιλογές στην επίσημη ιστοσελίδα της Lucid: Virtu MVP & Virtu MVP R2.0. Ποια από τις δύο πρέπει να επιλέξω;(2013/3/1)
Answer:Καλό θα ήταν να γνωρίζετε ότι το Virtu MVP2.0 είναι διαθέσιμο για λήψη και αγορά μόνο για τους διαδικτυακούς πελάτες της Lucid.
Παρακαλούμε επιλέξτε την πρώτη επιλογή πατώντας στον παρακάτω σύνδεσμο. http://www.lucidlogix.com/driverdownloads-mvp.shtml.
Question (335):
Μπορεί η DVI θύρα να μεταφέρει και ήχο, όπως συμβαίνει με την θύρα HDMI; Πώς μπορώ να την συνδέσω με την HDMI οθόνη μου;(2013/2/1)
Answer:Παρακαλούμε βεβαιωθείτε ότι πληρούνται οι παρακάτω προϋποθέσεις.
1. Η DVI θύρα της μητρικής επιβάλλεται να υποστηρίζει το πρότυπο HDCP.
Αν δεν είστε σίγουροι για τα χαρακτηριστικά της θύρας DVI, παρακαλούμε ελέγξτε τα χαρακτηριστικά της μητρικής σας στην ιστοσελίδα μας.
2. Χρησιμοποιήστε έναν μετατροπέα DVI to HDMI.
3. Στο BIOS, πηγαίνετε στην καρτέλα Advanced και κατόπιν στο North Bridge Configuration. Πατήστε την επιλογή DVI Function και επιλέξτε το [as HDMI].
4. Στον Πίνακα Ελέγχου, στις Επιλογές Ήχου, ρυθμίστε το HDMI ως την εργοστασιακή συσκευή παραγωγής.
Question (338):
Μετά την εγκατάσταση του προγράμματος VirtuMVP V2.1.22, δεν μπορώ να χρησιμοποιήσω τον εκτυπωτή μου. Τι συμβαίνει;(2013/2/1)
Question (332):
Το σύστημα παθαίνει BSOD όταν εγκαθιστώ τους οδηγούς της κάρτας γραφικών σε λειτουργικό σύστημα Windows 7/8 GPT mode με μητρικές Intel της σειράς 7 ή AMD FM Series. Τι πρέπει να κάνω;(2013/1/1)
Answer:Παρακαλούμε απογκαταστήστε το Virtu MVP από τον πίνακα ελέγχου και κατόπιν εγκαταστήστε τους οδηγούς της κάρτας γραφικών.
Μετά την επανεγκατάστση των οδηγών της κάρτας γραφικών, μπορείτε ελεύθερα να εγκαταστήσετε και το Virtu MVP.
Question (327):
Πως να χρησιμοποιήσω δύο οθόνες για να απολαύσω όσο το δυνατόν καλύτερες 3D επιδόσεις με την GTX 690;(2012/11/1)
Answer:Η GTX690 περιέχει δύο GPUs που μπορούν να δουλέψουν συνδυαστικά σε Maximum 3D Performance mode.
Απλά συνδέστε τις οθόνες σας στις θύρες εξόδου DVI_2 & DVI_3, οι οποίες προέρχονται από την ίδια GPU.
Question (324):
Πως μπορώ να εκμεταλλευτώ τον 128bit δίαυλο της onoboard κάρτας γραφικών σε μητρικές Z77, Z68, B75, H67;(2012/10/1)
Answer:O 128bit δίαυλος υποστηρίζεται από την τεχνολογία dual channel memory. Οπότε αν θέλετε η ενσωματωμένη κάρτα γραφικών να «τρέχει» στα 128bit, παρακαλούμε εγκαταστήστε dual channel μνήμες στο σύστημά σας.
Question (317):
Το σύστημά μου δεν κατάφερε να αναγνωρίσει την κάρτα VGA και δείχνει d6 στο Dr. Debug.(2012/6/1)
Answer:Εφόσον υπάρχουν ορισμένες κάρτες με λανθασμένες πληροφορίες στο vBIOS (Βίντεο BIOS), παρακαλώ επικοινωνήστε με τον πωλητή της κάρτας VGA ή αναβαθμίστε το BIOS της μητρικής κάρτας στην πιο πρόσφατη έκδοση από την ιστοσελίδα μας: https://www.asrock.com/support/download.asp
Εάν υπάρχουν άλλες ερωτήσεις, παρακαλώ επικοινωνήστε με το TSD της ASRock: ASRock TSD.
Question (291):
Όταν εγκαθιστώ το ATI HD6670, HD6570, και HD6450 στην σειρά A75/A55 μητρικών καρτών δεν έχω σήμα από την VGA έξοδο. Τι μπορώ να κάνω;(2011/9/1)
Ή μπείτε στο BIOS > North Bridge Configuration, και στην επιλογή [Dual Graphics] επιλέξτε το [Disabled].
Question (290):
I would like to update the VGA driver of Vision 3D from NVIDIA official website, what should I do?(2011/6/1)
Answer:Please refer to the link below for Driver Download section on Nvidia website: http://www.nvidia.com/Download/index.aspx
Please made selection as below,
Product Type : GeForce
Product Series: GeForce 400 Series
Product: Geforce GT420
Please refer to picture below:
Select your OS and language, then you could search for the driver.
Question (287):
If I play Blu-ray 3D movie and use DTS-HD 7.1 formats to output by PowerDVD 10 on Mini PC 3D series, the sound may be lag. How do I solve this problem?(2011/4/1)
Answer:Please kindly refer to below steps to download the patch 2721 version and install it for try.
Step 1. Click the icon to upgrade PowerDVD.
Step 2. Click the item "Critical update for PowerDVD!" as below.
Step 3. Click "Download free update now".
Step 4. Download the patch v2721 and install it.
Question (284):
Why can't I play Blu-ray discs with Core100HT-BD under Windows XP?(2011/4/1)
Answer:For Intel graphics platforms (including G41, H55, H67 chipsets…etc), Blu-ray playback is only supported on Windows Vista and Windows 7.
Question (270):
Όταν αναπαράγω 3D DVDs ή Blu-rays στην 3D TV μου δεν είναι στρωτά. Πως μπορώ να το φτιάξω αυτό?(2010/12/30)
Answer:Ψάξτε στις ρυθμίζεις της 3D TV σας εάν υποστηρίζει "Motion Plus" ή κάτι αντίστοιχο.
Παράδειγμα:
1. Στην Samsung 3D TV (UA46C7000WM) υπάρχει το "Auto Motion Plus", αυτό πρέπει να το βάλετε στο Clear όπως η παρακάτω εικόνα:
2. Στην Sony 3D TV ονομάζεται Motion Flow και πρέπει και αυτό να το βάλετε στο clear.
Question (256):
I have plug two NVIDIA® VGA cards on my motherboard but, I cannot find the Enable SLI option in NVIDIA® Control panel?(2009/9/3)
Answer:Following steps as below may help you to solve this issue.
1. If your motherboard has the SLI/XFire switch card, please put the SLI/XFire Switch card to 8x/8x, if there is no switch card on your motherboard, please skip this step.
2. Remove the graphics card from the PCI-E 1 slot.
3. Restart Windows.
4. Install the driver for the graphics card (again).
5. Put the VGA card back into the PCI-E 1 slot, and put the SLI bridge on.
6. Activate SLI function by NVIDIA® control panel.
Question (252):
If I use HDMI output, the desktop size can not fully fit the monitor.
How can I do?(2009/8/11)
Answer:
If your monitor has "PC mode", please try to adjust monitor to PC mode. If not, please contact your monitor vender for help.
Or you can do some setting on driver.
ATI VGA output, please refer setting A.
NVIDIA® VGA output, please refer setting B.
A. If you use ATI VGA output, please enter [ATI driver controller] to adjust [Scaling Option]
1. Right check the mouse, and enter ATI driver controller.
2. Find the [Scaling Option] to setting the bar until to fit the size.
B. If you use NVIDIA® VGA output, please enter [NVIDIA® driver controller] to adjust [Resize desktop]
1. Right check the mouse, and enter NVIDIA® driver controller.
2. Find the [Resize desktop] option to setting the bar until to fit the size.
Question (245):
I install ATI 2xxx, 3xxx, 4xxx series PCIE VGA card on the motherboard. After installing all Windows® XP drivers from the motherboard, it still shows an unknown "audio device on the high definition audio bus." message under device manager. What could I try?(2009/1/12)
Answer:There is an integrated audio chip in the ATI 2xxx, 3xxx, 4xxxx series graphics cards.
Please install ATI HDMI audio driver.
http://ati.amd.com/support/drivers/xp/hdmiaudio-xp.html
Question (242):
When I connect a HDMI_SPDIF cable from the HDMI VGA card (GTX260 or GF9800) to the onboard HDMI_SPDIF header, it cannot get sound from the HDMI output. What should I do?(2008/11/27)
Answer:The pin definition of the onboard HDMI_SPDIF header is different from the header of some VGA cards.
Please plug in the HDMI_SPDIF cable reversely like following picture.
Question (205):
I am using the onboard VGA of A780FullDisplayPort or ATi Radeon HD 2xxx/3xxx series PCIE card. Every time I run the 3DMARK or PCMARK, it always freezes during the splash-screen. It does not work at all. How do I fix it?(2007/8/3)
Answer:This is a compatibility issue of ATi Radeon HD 2xxx/3xxx PCIE card and 3DMARK/ PCMARK program.
Futuremark provides 2 solutions for this issue as follows. Solution 1: Add the command line –nosysteminfo into the target of 3DMARK / PCMARK's shortcut.
Solution 2: Rename the "Direcpll.dll" file to something else. (Found in C:\WINDOWS\system32\Futuremark\MSC\Direcpll.dll)
The link of Futuremark FAQ:
http://service.futuremark.com/support/search.jsp?categoryid=14&search=1
Question (199):
I'm using Windows® Vista™. I just installed a new VGA card, but the screen gets abnormal display. Is there anything I should do?(2007/4/20)
Answer:After you install a new hardware device (especially VGA card) under Windows® Vista™, we suggest re-rating your system (refer to the following steps). It may be able to solve the problem.
1.Go to Start > Control Panel > System and Maintenance> Performance Information and Tool
2.You will see the above screen. Press "Refresh Now" to re-rate your system.
Question (147):
I use PCI Express VGA card on my ASRock motherboard. My operation system is Windows 98SE / ME. In "Device Manager", there are two "Display Adapter Controllers" in "Display Adapters" option. What should I do?(2005/7/15)
Answer:Please follow the below steps to install PCIE VGA card driver.
a. Please enter "Device Manager" and you will see "Standard Display Adapter (VGA) and "Standard PCI Graphics Adapter (VGA)" in the "Display Adapters" option.
b. Please Choose "Standard Display Adapter (VGA)" and right-click "Remove".
c. After removing the device, please reboot your system. Then, you will only see "Standard Display Adapter (VGA)" in "Display Adapter" option.
d. Please start to install your PCIE VGA card driver.
Question (110):
My motherboard is SiS chipset based motherboard and the driver of AGP PCI to PCI is version 1.16a or 1.13.03 installed. After updating the Windows XP to service pack 2, there is an exclamation mark in AGP driver of device manager. What should I do?(2004/8/16)
Answer:If you see an exclamation mark in AGP driver of device manager, please simply reinstall the SiS AGP PCI to PCI driver from ASRock support CD or web site again.
Question (60):
Can I use on-board VGA and add-on AGP card for dual monitors?(2003/9/15)
Answer:No, if you would like to use dual monitors please install PCI VGA card with on-board VGA or AGP card with PCI VGA card on the motherboard.
Question (57):
My ASRock motherboard provides a 1.5V AGP slot. How do I know if I can use my AGP card on the motherboard?(2003/9/15)
Answer:Generally, the notch of 1.5V AGP slot is different from 3.3V AGP slot. Please refer to the following picture. If your AGP card has the 1.5V key, it is able to work on a 1.5V AGP slot. But few AGP adapters such as SiS305 based cards do not match the rule.
Please check detail AGP SPEC form http://www.ertyu.org/~steven_nikkel/agpcompatibility.html
If you are not sure what your AGP card is 1.5V or 3.3V, please double check with the card vender.
Question (15):
When I want to install an add-on AGP graphics card, do I need to adjust any settings in the BIOS if my motherboard has Onboard VGA?(2003/1/30)
Answer:No! You do not need to adjust any settings in the BIOS. ASRock motherboard will switch between add-on AGP and Onboard VGA automatically when you install or uninstall it.